Products

This heavy-duty single cartridge chamber will accommodate 10", 20", or 30" length filter cartridges. Because of the internal rod design, this chamber can accept various filter cartridge length +/- 1/4" without liquid bypass. The 4C chamber can accommodate non-standard cartridge lengths with more than 1/4" length from standard by adjustment of the internal rod. The 1" FPT inlet/outlet connections and 4” chamber diameter allow for increased filtration flow rates, especially for larger O.D. sub-micron cartridges (2.50” - 2.90”).

Cartridge Count: 4C - 1

These filter chambers incorporate heavy-reinforced ribbing within the molded parts. The double labyrinth o-ring sealing and the long-sleeved flanges, top and bottom, allow these chambers to operate at higher pressures and/or temperatures while also eliminating the use of external frame rods. The simplicity in design and accessibility allows one to completely disassemble and reassemble these chambers in order to replace any broken or damaged part. These chambers can also be converted in the field to a carbon treatment unit or to accept single open end, double #222 o-ring seal sub-micron cartridges with only a small modification. This simple conversion process eliminates the expense of purchasing a completely new chamber.

• Removes solid dirt particles   • Quick change of filter elements   • Choice of construction materials   • Accepts filter cartridges, submicron pleated cartridges or filter sleeves

Cartridge Count: 6C - 3

These filter chambers incorporate heavy-reinforced ribbing within the molded parts. The double labyrinth o-ring sealing and the long-sleeved flanges, top and bottom, allow these chambers to operate at higher pressures and/or temperatures while also eliminating the use of external frame rods. The simplicity in design and accessibility allows one to completely disassemble and reassemble these chambers in order to replace any broken or damaged part. These chambers can also be converted in the field to a carbon treatment unit or to accept single open end, double #222 o-ring seal sub-micron cartridges with only a small modification. This simple conversion process eliminates the expense of purchasing a completely new chamber.

• Removes solid dirt particles   • Quick change of filter elements   • Choice of construction materials   • Accepts filter cartridges, submicron pleated cartridges or filter sleeves

Cartridge Count: 8C - 5 

The Penguin plastic gauge guard is a unique, compact, molded design consisting of two threaded fluid chambers. There is no possibility of leakage due to uneven screwed components. Each piece contains a matching groove which confines the true o-ring incorporated on the OD of the impermeable diaphragm. A bleed plug and o-ring are included in the design for proper filling or the incompressible liquid in the gauge side chamber. This prevents air entrapment, thus providing an accurate reading with no needle vibrations.

Features
• Choice of materials CPVC, PVDF or Polypropylene   • Impermeable and resilient Viton diaphragm   • 1/4" FPT instrument (gauge) connection   • 1/2" FPT bottom system connection   • No metallic fasteners to corrode

Big Blue® Housings are manufactured of reinforced FDA grade polypropylene in both 10" and 20" lengths. The specially-designed High-Flow Polypropylene (HFPP) cap is available with either a 3/4", 1" and 1-1/2" NPT ports. #10 Clear Lexan Housing - with 1" NPT ports, for on-site inspection of flow and performance.
Specifications:
3/4" and 1" #10 “BB” take a 9-3/4" to 9-7/8" cartridge with flows of 1 to 20 GPM
1-1/2" #10 “BB” take a 9-3/4" to 9-7/8" cartridge with flows of 1 to 40 GPM
Maximum Pressure: 100 PSI Maximum Temperature: 100°F
3/4" and 1" #20 “BB” take a 20" to 20-1/8" cartridge with flows of 1 to 25 GPM
1-1/2" #20 “BB” take a 20" to 20-1/8" cartridge with flows of 1 to 50 GPM
Maximum Pressure: 90 PSI Maximum Temperature: 100°F