Instruments & Controls

The general purpose 26 GHz. pulse radar level transmitter provides continuous level measurement up to 32.8’ with a 4-20 mA signal output, and is configured via its integral push button display module. The non-contact liquid level sensor is intended for chemical or water storage applications in above grade metal or reinforced concrete tanks or below grade tanks of any material. Select this sensor for easy process conditions with corrosive media, light agitation, condensation or vapor, and installation in a low-profile tank adapter or flange fitting. Typical applications include chemical bulk storage and tanker trucks

• PTFE encapsulated antenna and mount for corrosive media

The intrinsically safe 26 GHz. pulse radar level transmitter provides continuous level measurement up to 32.8’ (10m) with a 4-20 mA analog and HART digital signal output, and is configured via its integral push button display module or HART communicator. The non-contact liquid level sensor is intended for chemical or water storage applications in above grade metal or reinforced concrete tanks or below grade tanks of any material. Select this sensor for easy process conditions with corrosive media, light agitation, condensation or vapor, and installation in a low-profile tank adapter or flange fitting. Typical applications include chemical bulk storage and tanker trucks.

• PFA encapsulated antenna and mount for corrosive media
• IP67 stainless enclosure with polycarbonate display window

The general purpose optic leak switch provides leak detection in and around secondary containment sumps, tanks and piping systems. 

Sensor may be located up to 1000’ from a Flowline relay controller.

Fail-safe leak sensor inverts “wet” to alert user for maintenance.

Requires only a small amount of liquid to detect the presence of a leak.

CSA approved for use in hazardous locations, the intrinsically safe ultrasonic level switch provides high or low liquid level detection of chemical, solvent or low viscosity petroleum based liquids. The submersible PP or PFA level switch sensor is universally mounted through the tank wall or inside the tank, and connected to a PLC or relay controller.

Compatible with Smart Trak and Switch-Pak installation fittings. Ideal for use as a high or low level switch in classified applications. Well suited for use in highly corrosive liquids.