Products
General Purpose - Indicators for Transmitters: LI40
Compatible with any EchoPod sensors, the general purpose level indicator displays the measured value, applicable relay status and set point configuration of the attached sensor, as the sensor was configured to operate by WebCal software. PodView requires no programming, and receives both power and data from the connected sensor. Through the indicator, users can adjust EchoPod relay set points in the field. PodView is installed up to 15’ (4.5m) away from the sensor in a panel or NEMA enclosure.
Field mount indicator for use with EchoPod sensors. Indicates level or volume and EchoPod relay status.
General Purpose - Level Transmitter: DL10
SKU
DL10-00
Max Oper Temp
20 to 140° F
Max Press
30 psi
Output
4-20 mA
Range
2" - 49.2"
Size
1" NPT
Price
$399.96
SKU
DL10-01
Max Oper Temp
20 to 140° F
Max Press
30 psi
Output
4-20 mA
Range
2" - 49.2"
Size
1" NPT
Price
$464.95
The general purpose ultrasonic transmitter provides continuous level measurement up to 49.2” (1.25m) with a 4-20 mA signal output, and is configured via our free WebCal® software. This non-contact liquid level sensor is ideally suited for corrosive, sticky or waste liquids, and is selected for chemical feed, IBC or drum, skid or machine and cooling tower applications.
- Narrow 2” beam width and short 2” dead band optimized for small tanks
General Purpose - Level Transmitter: DL14
The general purpose ultrasonic transmitter provides continuous level measurement up to 49.2” (1.25m) with a 4-20 mA signal output and four relays, and is configured via our free WebCal® software. Each relay is fully configurable for automatic fill, empty or alarm functions, and the embedded level controller may lower cost by replacing external control hardware. This non-contact liquid level sensor is well suited for corrosive, sticky or waste liquids, and is selected for chemical feed, IBC or drum, skid or machine and cooling tower applications.
- Four (4) programmable relays rated @ 1A / 60VA for switch, pump or valve control and fail-safety
General Purpose - Level Transmitter: DL24
SKU
DL24-00
Max Oper Temp
20 to 140° F
Max Press
30 psi
Output
4-20 mA
Range
4" - 9.8'
Size
1" NPT
Price
$599.94
SKU
DL24-01
Max Oper Temp
20 to 140° F
Max Press
30 psi
Output
4-20 mA
Range
4" - 9.8'
Size
1" NPT
Price
$664.93
The general purpose ultrasonic transmitter provides continuous level measurement up to 9.8’ (3m) with a 4-20 mA signal output and four relays, and is configured via our free WebCal® software. Each relay is fully configurable for automatic fill, empty or alarm functions, and the embedded level controller may lower cost by replacing external control hardware. This non-contact liquid level sensor is well suited for corrosive, sticky or waste liquids, and is selected for IBC or drum, cooling tower, day tank, skid or machine, open channel and chemical feed applications.
- Four programmable relays for switch, pump or valve control and fail-safety
General Purpose - Level Transmitter: DL34
SKU
DL34-00
Max Oper Temp
20 to 140° F
Max Press
30 psi
Output
4-20 mA
Range
8" - 18'
Size
2" NPT
Price
$799.92
SKU
DL34-01
Max Oper Temp
20 to 140° F
Max Press
30 psi
Output
4-20 mA
Range
8" - 18'
Size
2" NPT
Price
$864.91
The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0’ (5.5m) with a 4-20 mA signal output, and is configured via our free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for day tank, skid, IBC, sump and process tank level applications.
- Four programmable relays for switch, pump or valve control and fail-safety