Butterfly Valves & Actuation
The Type 240 pneumatically actuated wafer style butterfly valve from Georg Fischer is the ultimate choice for the high demands of the industrial world. Available in fail-close, fail-open and double acting with Namur compliant air connection. The Type 240 Butterfly valves have the same features and benefits of the +GF+ Type 567 manual valves. Operating Temp: 14°F-176°F (for actuator). Control Pressure: 100 psi maximum, neutral gases. Optional Features: Limit Switches, Stroke Limiter, Pilot Valves.
The Type 567 is a wafer style butterfly valve rated for pressures up to 150 psi and temperatures of up to 140° F for PVC and 176° F for CPVC, also available in polypropylene and PVDF. Better chemical compatibility is achieved because the inner body is the same material as the piping. The Type 567/578 Butterfly valves have a unique eccentric design that means the disc is not in contact with the seal in the open position. The result is less wear and operating torques half that of previous models. Georg Fischer double eccentric butterfly valves require approximately 50% less operating torque than boot-style competitive valves. Lever and gear operators are both available. In the lever version, the opening angle is clearly indicated on the index plate.
The Type 567 is a wafer style butterfly valve rated for pressures up to 150 psi and temperatures of up to 140° F for PVC and 176° F for CPVC, also available in polypropylene and PVDF. Better chemical compatibility is achieved because the inner body is the same material as the piping. The Type 567/578 Butterfly valves have a unique eccentric design that means the disc is not in contact with the seal in the open position. The result is less wear and operating torques half that of previous models. Georg Fischer double eccentric butterfly valves require approximately 50% less operating torque than boot-style competitive valves. Lever and gear operators are both available. In the lever version, the opening angle is clearly indicated on the index plate.