Valves & Actuation
![Plast-O-Matic RVT Series: Automatic - PVC \ FKM](/sites/default/files/styles/list/public/images/product/35ebe050cba4683d4511d69adb2c/RVD-RVT_2.jpg?itok=ix5SJjei)
Series RVT is an angle pattern design featuring a non-sticking Teflon® shaft passing through three U-cup seals. Venting between the upper and center U-cups results in Plast-O-Matic’s patented Fail-Dry® design for added protection. In the meantime the third seal continues to protect the control spring. The RVT design starts with 1/2" pipe size and runs through 2". Set pressures from 5 to 100 PSI. Once the relief valve is set, the valve will remain closed as long as the tank or line pressure does not reach the set pressure. The valve will begin to relieve when the set pressure is reached and will require an overpressure of approximately 40% to fully open. When the pressure falls below the set pressure, the valve will again close. Series RVT relief valves are constructed of Type 1, Grade 1 PVC, CPVC, Polypropylene, Teflon® or PVDF with solid Teflon® shaft. U-cup seals are EPDM or Viton®. The adjusting bolt, lock nut, control spring and fasteners are cadmium-plated steel. Stainless steel is available as an option.
![Spears Ball Check Valves: Automatic - PVC \ EPDM](/sites/default/files/styles/list/public/images/product/92ebda45e6d6fd3e0b9054b4784e/Spears%20Check%20TU2000~3.jpg?itok=g-tYpWpi)
![Spears Ball Check Valves: Automatic - PVC \ FKM](/sites/default/files/styles/list/public/images/product/92ebda45e6d6fd3e0b9054b4784e/Spears%20Check%20TU2000~3_0.jpg?itok=pjZIAM5c)
![Spears Ball Check Valves: PVC Screen Assembly](/sites/default/files/styles/list/public/images/product/default/PVC_Foot_Screen.jpg?itok=ohogdaHo)
![Butterfly Check Valves: Automatic - PVC \ EPDM](/sites/default/files/styles/list/public/images/product/2306b974194e309685e6bdf94aca/Spears%20Butterfly%20check%20flange.jpg?itok=7iaCPfPP)
Design Features
This multi-purpose check valve provides an extremely low profile and very quick response to back flow without slamming. The special design requires no more space then a piece of pipe, and incorporates a flexible elastomer seal for long life, and is suitable for mounting in any position for greater versatility.
Technical Information
2" through 8" sizes are rated for 150 psi @ 73°F, 10" and 12" sizes are rated for 100 psi @ 73°F. As a general guideline, opening and closing pressures will range from .2 to .5 psi for horizontal applications. Opening pressures tend to decrease in large size valves. Valves installed in vertical up-flow applications will require slightly higher pressures.
Features
• PVC or CPVC construction - no metal components • Quick response shut-off in any position • Field replaceable Flex-Seal - EPDM or Viton®
• Assembled with silicon-free, water soluble lubricants • Available with either spigot, flanged, grooved pipe or male threaded ends
• Sizes now available to 24" pipe size - call for information